The submitted Rangin Zereh datasheet describes an epoxy stone gel with an amine hardener for filling larger pores and cavities, and for mesh backing in certain conditions. Its heading states E-710G, while the product-description paragraph states E-700G. Resolve this code discrepancy with the manufacturer and the package label before applying the reported values.
The following values are reported in the February 2021 revision. Check the product and hardener codes, package instructions and applicable document revision before use.
| Datasheet code | E-710G |
|---|---|
| Reported mixing ratio by weight | 2:1 |
| Working time at 25°C | 25 minutes |
| Drying time at 25°C | 3 hours |
| Drying time at 50°C | 1 hour |
| Density | 1.09–1.13 g/cm³ |
| Volume solids | 100% |
| Colour in the datasheet table | Not specified |
The reported mixing ratio is by weight, not by volume. A drying time does not establish readiness for cutting, polishing or full service. Obtain processing instructions for the actual product package and line conditions.
Use completely dry and clean stone. Weigh the two components accurately and mix in a clean container with clean tools. Prepare an amount suitable for the product working time and actual temperature. Test penetration, adhesion, bubbles, halos and the finished appearance on a sample of the same stone before production.
Use protective gloves and safety glasses. Close containers after use and store in a dry, cool place away from sunlight. Request the safety data sheet for the actual product.
No. The supplied datasheet reports a weight ratio. Do not use it as a volume ratio or transfer a ratio from a different resin.
The submitted datasheet does not specify a cutting or polishing interval. Confirm the required processing stage, temperature and manufacturer instructions separately.
Send the stone type and colour, crack or cavity photographs, processing stage, line temperature, required quantity and package codes.
Download the Rangin Zereh E-710G datasheet — February 2021 revision (Persian PDF)
The heading E-710G and body-text code E-700G are inconsistent within this source. The values above report its table and do not confirm that the two codes are interchangeable.
Compare applications in our natural stone epoxy guide. Call Armani Fam for availability, product-code checks and processing documentation.
