contact us

Antifouling Coating

Voyage Guard Active A200-M402 technical data sheet page

Voyage Guard Active A200-M402 technical data sheet page

Voyage Guard Active A200-M402 technical data sheet page

 

Download the Antifouling Coating catalogue: A200-M402-2

Voyage Guard Active Antifouling; A200-M402

The Kansai Paint technical data sheet dated April 2024 describes A200-M402 as a single-pack, physically drying, self-polishing antifouling coating based on a special acrylate binder. Its stated use is as a finish coat in immersed environments, on carbon steel over approved primers and tie coats.

Technical data from the published sheet

  • Finish: matt. Listed colours: red/pink.
  • Packaging: 25 kg.
  • Mixing: single pack; no resin-to-hardener mixing ratio. Pot life: N/A.
  • Recommended dry film thickness: 100–170 microns. Confirm the layer schedule for the project.
  • Touch dry: 30 minutes at 25°C. Hard dry: 10 hours at 25°C.
  • Minimum recoat interval: 7 hours at 20°C. The sheet lists the maximum as indefinite and notes dependence on later exposure conditions.
  • Surface temperature: 10–50°C, on a dry, clean surface at least 3°C above the dew point.
  • Application: air/airless spray, brush or roller; control dry film thickness when using a brush or roller.
  • Listed thinner/cleaner: A840-0200-1.

Source: A200-M402 technical data sheet, April 2024. The download filename is A200-M402-2; the product code inside the document is A200-M402. Confirm that the supplied grade and current document match before ordering.

System compatibility and launch time

The sheet recommends Kansai Paint epoxy–vinyl intermediate sealer or Vinyl H/B sealer. This does not establish compatibility with every other catalogue product. Hard-dry time is not a launch window. An explicit launch interval was not found in the reviewed sheet; request it for the proposed system and actual temperature.

Project information for an enquiry

Provide the hull material, water type, vessel speed and inactivity periods, docking schedule, immersed surface area, previous coating and intended launch date. Explore below-waterline coatings and the marine coating selection guide. Contact Armani Fam for availability, the current TDS and SDS, and a confirmed launch window.